NP300 Navara Rear Locker Override Kit V3

Here it is, the production version of the NP300 Rear DiffLock override that is Plug n Play, and uses the factory button. After much R&D, this production version is now smaller thanks to the Aussie designed pcb module, new case and mount designed created and printed here in QLD by KO Gear Australia and with the new designed interchangeable harness.

Features

• Allows the factory console locker switch to operate the override mode
• The override module mounts next to factory locker control module in the Left Rear Qtr. panel of the NP300.
• It is connected by using an intercept harness that plugs inbetween the factory locker module and connector.
• Includes a Toggle switch that is design to mount on the Left Rear Qtr Vent to swap between the factory mode ('stock') and the 'override' operation. modes.
• *** No matter what mode this toggle switch is in, the locker activation is still via the Factory Selector on the console.

WHY?

• The issue with factory setting is you need to be in low range and under 7kph. (yes manual does say H4 also, but no one has got it to work in h4).
• This allows the operation of the E-locker like any after market E-locker when the driver requires it in any drive mode and retains the console factory button function and dash light and does not throw any fault lights in doing so. Naturally common sense in usage is highly recommended.

This product is for 'Off Road" Use. Please be mindful that the 2WD and Rear Locker kits do override the STD vehicle function and or modify how the vehicle operates. Although care and attention has been taken in the products, adding them at your NP300 is at own risk. The kits are designed with fuse and component protection in mind to reduce risks, so please install well and enjoy wisely and safely.